Roland Elek
November 19, 2026
10 minutes

How Much Does an Office Build Out Cost per Square Foot

Empty modern office desks with monitors and chairs ready for an office build out project

Office build out cost averages $162 per square foot across U.S. markets, per Cushman & Wakefield's 2026 guide. Gateway markets average $196 per square foot, and the Americas average is $149. Those figures cover construction only, not furnishings or technology. Design fees, IT, audio-visual gear, and furniture add another 49% of hard cost in a Tier 2 market.

Key Takeaways

  • Construction averages $162 per square foot across U.S. markets and $149 per square foot across the Americas.
  • Soft costs, IT, audio-visual, furniture, and miscellaneous items add 49% of hard cost in Tier 2 markets.
  • Electrical work is the largest trade at 24% of hard cost.
  • Tenant improvement allowances can cut a tenant's cost by up to $85 per square foot.
  • The Florida Building Code 9th Edition takes effect on December 31, 2026.

How Much Does an Office Build Out Cost per Square Foot?

Average build out spend is $162 per square foot across U.S. markets, according to Cushman & Wakefield's 2026 guide. The Americas average is lower at $149 per square foot across 59 markets. Gateway markets average $196 per square foot, about 21% above the U.S. figure. Each number measures construction cost for the space itself.

A contractor prices the same suite differently based on finish level, building age, and system condition. Our office buildout contractor team starts every estimate from drawings instead of market averages. Averages set a starting range, and a site estimate sets the real budget.

Table 1 compares published benchmarks from Cushman & Wakefield and JLL.

Published Office Fit-Out Cost Benchmarks Per Square Foot
BenchmarkCost per sq ftWhat it coversSource
Americas average$149Construction across 59 marketsCushman & Wakefield, 2026
U.S. average$162Construction across U.S. marketsCushman & Wakefield, 2026
Gateway market average$196Construction in gateway marketsCushman & Wakefield, 2026
San Francisco$228Construction in the highest-cost marketCushman & Wakefield, 2026
JLL project average$196.49Design, construction, furniture, fixtures, and ITJLL

JLL's figure is higher because it includes furniture and IT, so the two sources measure different scopes. JLL puts the average build out cost office space tenants carry at $196.49 per square foot across 2,469 project budgets. Those budgets span 51 markets and 17 industries.

Scope explains the gap between sources. Cushman & Wakefield reports hard cost and adds soft items as percentages. JLL folds design, furniture, and IT into one project average. Compare quotes on the same scope, or the numbers will not line up.

Infographic of 2026 office build out cost benchmarks per square foot: $149 Americas, $162 U.S., $196 gateway, and $228 San Francisco

The graphic above shows the four construction benchmarks side by side. Each benchmark splits into trades, and the next section lists those trades.

What Does the Hard Cost of an Office Build Out Include?

The hard cost of an office build out includes every physical trade, from drywall and doors to electrical and fire protection. Cushman & Wakefield groups that work into nine categories. Table 2 lists all nine, from electrical and mechanical work to millwork and contingency.

The general requirements line covers the contractor's site management, and the fee line covers overhead and profit. Each category appears as its own line in a detailed estimate.

Electrical work is the largest share at 24% of hard cost, while architectural millwork is the smallest at 3%. Electricians earned a median of $63,190 per year in May 2025, according to the Bureau of Labor Statistics. Labor rates therefore flow straight into the electrical line.

The table below shows how Cushman & Wakefield splits a $162.58 per square foot budget in Atlanta, a Tier 2 market.

Atlanta 2026 Office Hard Cost by Trade Per Square Foot
TradeCost per sq ftShare of total
Electrical$38.9424.0%
Mechanical, plumbing, and fire protection$31.7419.5%
Drywall, acoustic, and carpentry$22.5813.9%
Doors, frames, and hardware$18.1911.2%
General requirements, conditions, and fee$15.259.4%
Contingency$13.358.2%
General finishes$11.146.9%
Architectural millwork$7.344.5%
Miscellaneous architectural trades$4.052.5%
Total$162.58100%

Mechanical, plumbing, and fire protection follow electrical at 19.5%, and contingency adds 8.2%. Contingency sits inside hard cost. Soft costs sit outside these trades and raise the total further.

How Much Do Soft Costs, IT, and Furniture Add to the Total?

Soft costs, IT, audio-visual equipment, furniture, and miscellaneous items add 49% of hard cost in Cushman & Wakefield's Tier 2 markets. Miami sits in that tier. The guide expresses each add-on as a percentage of the hard cost.

The five add-ons break down as follows in Tier 2 markets.

  • Soft costs: 11% of hard cost.
  • IT: 4% of hard cost.
  • Audio-visual equipment: 12% of hard cost.
  • Furniture: 20% of hard cost.
  • Miscellaneous items: 2% of hard cost.

Those five percentages total 49%. Furniture is the largest add-on at 20%, and audio-visual equipment follows at 12%. On the $162 per square foot U.S. average, the add-ons come to $79.38, and the all-in cost reaches $241.38 per square foot. These figures illustrate published averages and do not quote a price.

Infographic showing Tier 2 office build out add-ons on a $162 per square foot hard cost, totaling $79.38 for an all-in $241.38

The graphic above prices each add-on in dollars per square foot. Our estimate breakdown guide explains how contractors present these lines. Those lines scale with square footage, as the next example shows.

How Much Does It Cost to Build Out Office Space of 5,000 Square Feet?

Building out 5,000 square feet of office space costs $810,000 in construction at the U.S. average of $162 per square foot. Tier 2 add-ons of 49% contribute another $396,900. The all-in total reaches $1,206,900.

The add-ons split into soft costs of $89,100, IT of $32,400, and audio-visual equipment of $97,200. Furniture adds $162,000, and miscellaneous items add $16,200. Each amount equals the stated percentage of the $810,000 hard cost.

A site visit replaces these averages with real numbers, and the estimate then reflects the suite itself. We price the space through our office buildout services after reviewing existing electrical, mechanical, and ceiling conditions.

The same site review sets the permit scope, which the next section covers along with the other drivers of cost.

What Changes Build Out Cost by Market and Code?

Market, labor, materials, and code requirements change budgets from one project to the next. San Francisco leads at $228 per square foot, ahead of San Jose at $224 and Seattle at $223. Those three markets sit well above the $162 U.S. average.

Year-over-year movement shows the same direction. Cushman & Wakefield reports U.S. costs rose about 5%, with the Northeast leading at 7% and the Midwest lowest at 2.1%. The Tri-State region recorded the highest regional average at $193 per square foot.

Labor and materials add pressure everywhere. Cushman & Wakefield reports that 79% of general contractors expect labor and material costs to rise over the next six months. None of the surveyed contractors expect declines. Copper and concrete prices rose over the past year.

Code timing matters in Florida. The Florida Building Code 9th Edition takes effect on December 31, 2026. Miami-Dade applies it to online submittals after 4 PM on December 30, 2026. Local code may be stricter, so confirm the edition with your permit office.

Permit costs moved as well. The county revised its fee schedule on October 1, 2025, the first increase in more than 17 years. Our permit fee guide covers the charges owners should expect.

Accessibility rules affect the budget too. The Americans with Disabilities Act path-of-travel rule sits in 28 CFR 36.403. Upgrades count as disproportionate when they exceed 20% of the alteration cost for the primary function area. A licensed architect confirms how that rule applies to a specific suite. Your building permit requirements depend on the scope you file.

Supplier pricing adds a second pressure. Cushman & Wakefield reports that 83% of contractors expect suppliers to raise prices, while 63% expect to raise their own. Another 20% expect to absorb higher costs, up from 13%.

Permit and code costs sit alongside the lease terms that landlords control.

How Do Tenant Improvement Allowances Reduce Build Out Cost?

Tenant improvement allowances reduce build out spend by up to $85 per square foot, according to JLL. A landlord contributes the allowance toward the tenant's construction work. The lease sets the amount.

The allowance can change a market's ranking. JLL shows San Francisco at $237.13 per square foot, the second-highest fit-out cost. The city drops to fourth after the average $45 allowance. Our explanation of lease allowances walks through the mechanics.

A $45 per square foot allowance on 5,000 square feet equals $225,000. That amount would reduce the $810,000 construction example to $585,000. The figure illustrates the math and does not predict a landlord's offer.

Local market conditions shape what landlords offer. Cushman & Wakefield's Q3 2026 report shows Miami office vacancy at 13.9% and average asking rent at $67.77 per square foot. Class A asking rent is $74.77 per square foot, and Class B is $54.76. Tenants should read allowance terms before they sign, because the lease fixes them. A tenant improvement specialist can price the work against the allowance before negotiations close.

Lease terms and allowances feed the budget, and the budget needs controls from the start.

How Can You Control an Office Build Out Budget Before Construction Starts?

Control an office build out budget by fixing scope, pricing early, and holding contingency inside the hard cost before construction starts. Six steps keep the number stable.

  1. Write a program listing headcount, rooms, and technology needs.
  2. Request a site-specific estimate from a licensed Florida contractor.
  3. Compare the allowance terms in each lease option.
  4. Confirm code and permit requirements with the permit office.
  5. Price IT, audio-visual equipment, and furniture separately from construction.
  6. Carry contingency in the hard cost, as Cushman & Wakefield does.

Contingency took 8.2% of the Atlanta hard cost, or $13.35 per square foot. Holding it inside the hard cost keeps scope changes from forcing a new budget.

Florida Statutes section 489.105 describes a certified contractor as one allowed to work in any Florida jurisdiction. Our guide on contractor vetting explains what to ask before you sign.

Six-step office build out budget checklist covering program, estimate, allowance, permits, soft costs, and contingency

The graphic above restates the six steps in order. Step two replaces averages with measured quantities from the site, and steps three and four set the lease and code limits. Our office renovation plan guide adds the scheduling side of the same process. Several related cost questions follow from these steps.

What Else Should You Know About Office Build Out Costs?

What Are Office Fit-Out Costs?

Office fit-out costs are the expenses of turning an empty or unfinished commercial space into a working office. Fit-out and build out describe the same work, and Cushman & Wakefield uses the fit-out term. Office fit out costs per square foot cover construction in its guide and add design, furniture, and IT in the JLL study.

Landlords deliver space as a shell or a second-generation suite, and shell delivery changes how much construction a tenant buys. Delivery condition also changes the commercial price, which the next question addresses.

How Much Does a Commercial Fit Out Cost?

A commercial fit out costs $149 to $196 per square foot on average, from the Americas average to the gateway market average. Cushman & Wakefield publishes both figures in its 2026 guide. Other commercial building types follow different budgets, and our square foot pricing guide covers them. Zip code is the next search.

What Is the Office Build Out Cost by Zip Code?

Neither the Cushman & Wakefield study nor the JLL study lists office build out cost by zip code. Both report cost by city market. Two suites in one zip code can differ in building age, ceiling height, and electrical capacity. A site visit prices those differences, and a calculator frames the first range.

How Do You Use an Office Build Out Cost Calculator?

Use a calculator by multiplying square footage by cost per square foot, then adding soft cost percentages. For example, 5,000 square feet at $162 gives $810,000. The 49% add-ons raise that total to $1,206,900. A calculator returns a planning range and not a bid. Ownership questions come next.

What Is the Difference Between Build Out and Tenant Improvement?

Build out and tenant improvement describe the same interior construction, and the lease term is tenant improvement. A landlord allowance can fund part of that work, so allowance terms appear in the lease. Both terms cover walls, ceilings, finishes, and building systems inside the leased suite.

Is It Cheaper to Build or Buy a Building?

Buying an existing building costs less than constructing a new one when the structure suits the use, since the shell exists. The buyer still pays for the office build out. Cushman & Wakefield counts the Americas office pipeline at a 25-year low. Its Q3 2026 local report lists about 1.8 million square feet under construction. Compare a purchase quote and a ground-up quote for the same use before deciding.

Frequently Asked Questions About Build Out Pricing

How Much Does It Cost to Build a 2,000 Square Foot Office?

A 2,000 square foot office costs $324,000 in construction at the U.S. average of $162 per square foot. Tier 2 add-ons of 49% bring the all-in total to $482,760.

Does an Office Build Out Include Furniture?

Furniture sits outside hard cost in Cushman & Wakefield's guide, where it adds 20% in Tier 2 markets. JLL's $196.49 average includes furniture, fixtures, and IT.

Which Trade Costs the Most in an Office Build Out?

Electrical work costs the most at 24% of hard cost in Cushman & Wakefield's 2026 data. Mechanical, plumbing, and fire protection rank second in the Atlanta example at 19.5%.

How Does MT Construction Group Help With Office Build Out Budgets?

MT Construction Group helps with office build out budgets by pricing from drawings and not from averages. We scope each office space buildout against the benchmarks above and your lease terms. The resulting budget compares directly with your allowance.

We manage each office build in phases, and each phase advances after the prior one is inspected and signed off. Handoff includes documentation, updated as-built drawings, and material warranties. Our team at MT Construction Group reviews drawings before pricing so the estimate reflects your suite.

Link copied!